• 59440218
1

PENTENS T-200H ( 4.5KG) WATER PROOFING UV RESISTANT ELASTOMERIC PU 防水漆 / Water Resistant

Regular price
RM 88.95
Sale price
RM 88.95
Regular price
RM 0.00
Worldwide shipping | Futt Kong ES Store
Worldwide shipping
Secure payments | Futt Kong ES Store
Secure payments
Authentic products | Futt Kong ES Store
Authentic products

READY STOCK IN MALAYSIA


FAST DELIVERY




PENTENS T-200H UV Resistant Elastomeric Waterproofing Coating


PENTENS T-200H is based on a newly developed Water based Polyurethane and Acrylic Polymers. It is dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. It takes the majority of the heat load off a building’s skin and reduces temperatures to approximately that of outside shade.




USES:


PENTENS T-200H is a one-part elastomeric cross linking latex copolymer emulsion designed as exposed waterproofing coating on:


● RC gutters and planter boxes


● Floor slabs


● Roof decks


● Wood siding / Fences


● External wall


● Flat roof


● Metal roof


● Concrete structures




ADVANTAGES:


■ High elongation.


■ Can resist to ponding water.


■ Water-based, environmentally friendly.


■ Air and UV protection.


■ Easy-cleaning and weather resistant.


■ Chemical resistance and waterproof.


■ User friendly, suitable to use on any surface.


■ Adheres well over aged, galvanized and metal roofs, wood, asphalt or aluminum coatings, polystyrene foam insulation, polyester plastic panels, precast flat concrete and barrel cement tiles and many roofing materials.


■ Prevention of ravages of acid rain, freeze thaw, cycles, sunlight, bacteria and fungus.


■ Non-toxic.




Application


Substrate should be primed with a 1:3 mixture of PENTENS T-007 and water. Brush on at the approximate rate of 0.3 kg/m². On areas exposed hot drying winds, 2 to 3 thin coats of paint may be more successful than 1 thick coat.


PENTENS T-200H is suggested to apply at least 2 coats. The first coat should be applied in one direction only. If possible the second coat should be applied at right angles to the first. (Called cross application method)


Leave to cure for approximately 8 hours before applying second coat. PENTENS T-200H can be installed with conventional airless spray equipment, brush or roller.



#PENTENS #T-200H #4.5kg #WaterProofingUVResistant #ElastomericPU #ReadyStock #FastDelivery