PENTENS T-200H (20KG)WATER PROOFING UV RESISTANT ELASTOMERIC PU 防水漆 / Water Resistant

READY STOCK IN MALAYSIA
FAST DELIVERY

PENTENS T-200H UV Resistant Elastomeric Waterproofing Coating
PENTENS T-200H is based on a newly developed Water based Polyurethane and Acrylic Polymers. It is dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. It takes the majority of the heat load off a building’s skin and reduces temperatures to approximately that of outside shade.

USES:
PENTENS T-200H is a one-part elastomeric cross linking latex copolymer emulsion designed as exposed waterproofing coating on:
● RC gutters and planter boxes
● Floor slabs
● Roof decks
● Wood siding / Fences
● External wall
● Flat roof
● Metal roof
● Concrete structures

ADVANTAGES:
■ High elongation.
■ Can resist to ponding water.
■ Water-based, environmentally friendly.
■ Air and UV protection.
■ Easy-cleaning and weather resistant.
■ Chemical resistance and waterproof.
■ User friendly, suitable to use on any surface.
■ Adheres well over aged, galvanized and metal roofs, wood, asphalt or aluminum coatings, polystyrene foam insulation, polyester plastic panels, precast flat concrete and barrel cement tiles and many roofing materials.
■ Prevention of ravages of acid rain, freeze thaw, cycles, sunlight, bacteria and fungus.
■ Non-toxic.

Application
Substrate should be primed with a 1:3 mixture of PENTENS T-007 and water. Brush on at the approximate rate of 0.3 kg/m². On areas exposed hot drying  winds, 2 to 3 thin coats of paint may be more successful than 1 thick coat.
PENTENS T-200H is suggested to apply at least 2 coats. The first coat should be applied in one direction only. If possible the second coat should be applied at right angles to the first. (Called cross application method)
Leave to cure for approximately 8 hours before applying second coat. PENTENS T-200H can be installed with conventional airless spray equipment, brush or roller.

****************

PENTENS T-200H 抗紫外线弹性防水涂料
PENTENS T-200H 基于新开发的水性聚氨酯和丙烯酸聚合物。它极大地减少了空调或非空调建筑中的太阳能热吸收。它带走了建筑物表皮的大部分热负荷，并将温度降低到接近室外阴影的温度。

用途：
PENTENS T-200H 是一种单组分弹性交联乳胶共聚物乳液，设计用作暴露的防水涂料：
● RC 排水沟和花盆
● 楼板
● 屋顶甲板
● 木壁板/围栏
● 外墙
● 平屋顶
● 金属屋顶
● 混凝土结构

好处：
■ 高伸长率。
■ 能抵抗积水。
■ 水性、环保。
■ 空气和紫外线防护。
■ 易于清洁和耐候。
■ 耐化学性和防水性。
■ 用户友好，适用于任何表面。
■ 在老化、镀锌和金属屋顶、木材、沥青或铝涂层、聚苯乙烯泡沫绝缘材料、聚酯塑料面板、预制平面混凝土和桶装水泥瓦以及许多屋顶材料上都能很好地粘附。
■ 防止酸雨、冻融、周期、阳光、细菌和真菌的破坏。
■ 无毒。

应用
基材应使用 PENTENS T-007 和水的 1:3 混合物打底。以大约 0.3 kg/m² 的速度刷涂。在暴露在干燥热风中的区域，2 到 3 层薄漆可能比 1 层厚漆更成功。
建议 PENTENS T-200H 至少涂 2 层。第一道涂层只能在一个方向上进行。如果可能，第二层应与第一层成直角。
(称为交叉应用法）
在涂抹第二层之前，让其固化约 8 小时。 PENTENS T-200H 可以与传统的无气喷涂设备、刷子或滚筒一起安装。

#PENTENS  #T-200H #4.5kg #WaterProofingUVResistant #ElastomericPU #ReadyStock #FastDelivery