Futt Kong - Selleys Multipurpose Knead it (50g) Polymer Repair System
- Regular price
- RM 9.00
- Sale price
- RM 9.00
- Regular price
-
RM 0.00
Worldwide shipping
Secure payments
Authentic products
Share
Product details of SELLEYS Knead It Multipurpose 50g
SELLEYS Knead It Multipurpose 50g
is a fast-setting polymer compound that enable permanent repair to many surface. The modeling-clay like materials eliminates drips and runs, facilitates adhesion to the substrate and allows the material to be shaped and formed as needed before curing begins. Once cured, it can be drilled, screwed, swan, sanded, or painted. It is suitable for interior or exterior use.
Features:-
Will not sag, run or drip
Easy to use - no mess
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing
Good adhesive strength
Can be used to reshape, rebuild and repair a multitude of surfaces and applications
Good gap filling properties
Long-lasting, durable solution
Heat resistant to 120°C continuously or 140°C intermittently
Can be used under water. (but dry surfaces for application are best and recommended)
Rapid set time (<10 minutes)
Excellent anchoring properties
Direction:-
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 2 minutes of mixing) and mold to shape if required.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 5-10 minutes Knead-It Multi Purpose will harden and begin to form a strong bond.
After 60 minutes Knead-It Multi Purpose may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water before product hardens.
Safety Tips:-
Where possible wear protective gloves when using Knead-It Multi Purpose. Contact with skin may result in irritation. Epoxy resin is a known skin sensitizer. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
If redness or swelling of skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on skin, it will peel off in a few days without removing by cutting and abrasion. If cured on skin, it will peel off in a few days without
SELLEYS Knead It Multipurpose 50g
is a fast-setting polymer compound that enable permanent repair to many surface. The modeling-clay like materials eliminates drips and runs, facilitates adhesion to the substrate and allows the material to be shaped and formed as needed before curing begins. Once cured, it can be drilled, screwed, swan, sanded, or painted. It is suitable for interior or exterior use.
Features:-
Will not sag, run or drip
Easy to use - no mess
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing
Good adhesive strength
Can be used to reshape, rebuild and repair a multitude of surfaces and applications
Good gap filling properties
Long-lasting, durable solution
Heat resistant to 120°C continuously or 140°C intermittently
Can be used under water. (but dry surfaces for application are best and recommended)
Rapid set time (<10 minutes)
Excellent anchoring properties
Direction:-
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 2 minutes of mixing) and mold to shape if required.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 5-10 minutes Knead-It Multi Purpose will harden and begin to form a strong bond.
After 60 minutes Knead-It Multi Purpose may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water before product hardens.
Safety Tips:-
Where possible wear protective gloves when using Knead-It Multi Purpose. Contact with skin may result in irritation. Epoxy resin is a known skin sensitizer. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
If redness or swelling of skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on skin, it will peel off in a few days without removing by cutting and abrasion. If cured on skin, it will peel off in a few days without
×
×
×