SIKA ANCHOR FIX / SIKA Anchorfix/Sika AnchorFix-S Fast Curing Anchoring Adhesive 300ml

Application on Solid Masonry/Concrete:

1) Drilling of hole with an electric drill to the diameter and depth required. Drill hole diameter must be in accordance with anchor size.

2) The drill hole must be cleaned with a blow pump or by compressed air, starting from the bottom of the hole. (at least 2x)

3) The drill hole must be thoroughly cleaned with the special steel brush (brush at least 2x). The diameter of the brush must be larger than the diameter of the drill hole.

4) The drill hole must be cleaned with a blow pump or by compressed air, starting from the bottom of the hole. (at least 2x)

5) Pump approx. twice until both parts come out uniformly. Do not use this material. Release the gun pressure and clean the cartridge opening with a cloth.

6) Inject the adhesive into the hole, starting from the bottom, while slowly drawing back the static mixer.In any case avoid entrapping air. For deep holes extension tubing can be used.

7) Insert the anchor with a rotary motion into the filled drill hole. Some adhesive must come out of the hole.

 

Application on Hollow Blocks:

1) Drilling of hole with an electric drill to the diameter and depth required. Drill hole diameter must be in accordance with anchorand perforated sleeve size.

2) The drill hole must be thoroughly cleaned with a round brush (brush at least 1x). The diameter of the brush must be larger than the diameter of the drill hole.

3) The drill hole must be cleaned after each cleaning step with a blow pump or by compressed air, starting from the bottom of the hole (pump at least 1x).

4) Insert perforated sleeve completely into the drill hole.

5) Pump approx. twice until both parts come out uniformly. Do not use this material. Release the gun pressure and clean the cartridge opening with a cloth.

6) Inject the adhesive into the perforated sleeve, starting from the bottom, while slowly drawing back the static mixer. In any case avoid entrapping air.

7) Close the cap from the perforated sleeve to avoid some escape of the resin during entering the steel rod.

8) Insert the anchor with a rotary motion into the filled perforated sleeve. Use the adequate steel rod size.

9) During the resin hardening time the anchor must not be moved or loaded.

Specifications of Sika Anchorfix Strong Joining Silicone